I just got a CZ 82 pistol to replace the ones I used to own but had to sell in a horrible fit of “brokeness”! I’ve always loved this design due to it’s superior ergonomics and shootability. Chambered in 9mm Makarov, this pistol packs 12 rounds in the magazine. It has an ambidextrous magazine release and safety, and a chrome lined bore with polygonal rifling.
Several ammo makers produce modern defensive loads in 9×18, so this military surplus pistol remains a viable choice for concealed carry.
The Extar EP9 (check out the review HERE) is a fun little personal defense weapon (PDW) chambered in 9mm Luger. With a pistol this fun to shoot, you’re going to have to clean it often. Here’s how you take the thing apart!
Extar EP9 Upper and Lower Separation
Disassembly is accomplished by first ensuring that the weapon is clear (no magazine inserted and no round in the chamber), and then pushing out the rear takedown pin located in the same spot as on an AR.
Next, you place your non-dominant hand in a sort of firing
grip on the magazine well, then use your thumb to push FORWARD on the
handguard. The front of the upper receiver is NOT held in by a pin like the
AR-15’s- instead of going through a hole in a tab on the receiver, the pin
stays in place and the receiver has a hook that holds it fast to the lower.
Extar EP 9 Bolt Removal
Once you have the upper and lower separated, you can draw back on the charging handle and remove the bolt through the rear of the upper receiver.
If you want to take the bolt apart, all you do is tug rearward on the back half- this is a weight added to give the bolt mass. After it comes apart you can then see the firing pin. To remove the firing pin you must first take out the cotter key on the left of the bolt (as you’re looking at the pin), then the bolt will come free.
Extar EP9 Buffer Removal
Instead of a plunger to retain the buffer spring, there is a plate located just in front of the buffer, which has a small tab that protrudes up in place of the plunger. To remove the buffer simply push in on it to relieve the pressure and pull the plate “up” and out.
In order to reassemble the weapon you reverse the process. Check out my video on the Extar EP9 disassembly/reassembly process for more details, and to see how to remove the handguard and muzzle device.
In this video, Yugoslavian Tokarev- Zastava M57 Range Report, we take a look at that former nation’s version of the venerable Russian TT33 Tokarev design. This pistol is chambered in 7.62×25 (7.62 Tokarev), which packs a considerable amount of punch for a pistol round.
In this video, ATI Titan LW Officer Model- Budget 1911, we take a look at this single stack Officer model sized .45 acp pistol from American Tactical Imports. I traded my Canik TP9V2 for it at my local gun shop, who had it listed for $319. This budget 1911 comes with features you’d expect on much higher priced pistols, like an extended beavertail, round hammer, skeletonized trigger, and Novak-style sights! If you’re looking for a wallet friendly compact 1911, take a peek at the ATI Titan Lightweight!